A compressor bracket is not pigeon netting

Aircon-bracket searches return aircon companies, marketplace brackets, and HDB guideline PDFs that this machine could not read (HTTP 403). We will not invent a clause from a PDF we did not open. What this site already prints is on the ledge guide: Town Council and MCST rules allow a tensioned net inside the ledge and do not allow drilling the external facade. Netting is S$350 to S$580. A bio-enzyme wash when a nest is active is S$280 to S$480. Those rows are bird-proofing. They are not a compressor bracket.

A bracket we fabricate, to feet you have measured, is quote on inspection. It is refused if the only fixing is a screw into the facade the guide already says not to drill. A clamp that the Town Council or the MCST has allowed in writing is still a quote, not a netting price. We do not publish a kilogram rating for a catalogue bracket bought online.

Homey Furnishing Pte. Ltd. is not a professional engineer, not an architect, and not a Qualified Person. BCA’s page on works that do not need plan approval says a Qualified Person is an architect registered with the Board of Architects, or a professional engineer registered with the Professional Engineers Board, holding a valid practising certificate. We do not sign a structural calculation and we do not decide that a frame is exempt. If the work is building work, the owner asks that person. We quote the metal after the answer is clear, or we stop. Window replacement on an HDB flat is an approved window contractor under BCA workhead RW01 where that rule applies. Homey Furnishing is not that contractor. We will not cut the window to “seat” a compressor. The aircon placement note does not publish a capacity, a pipe length, or a trunking price per metre. Trunking stays on the trunking page as quote on inspection.

A condo ledger is the MCST even when the metal looks like an HDB ledge. Send their written answer with the photo. HDB’s renovation page is the flat. A fine of up to $5,000 is HDB’s sentence when a renovation breaches those rules. V On Construction invoices an HDB permit when the work needs one. Homey Furnishing does not. A dedicated circuit for the outdoor unit is S$220 to S$450 only when the DB page’s sentence matches, done as electrical work. It is not hidden in the bracket.

Send the ledge depth, the compressor footprint, and whether any fixing already exists. We will not guess a projection that clears the neighbour’s drip. Standing water on the ledge is a fall problem. We are not a vector-control operator and we do not invent a mosquito fine.

Homey Furnishing Pte. Ltd. (ACRA UEN 202018148K), 27 Mandai Estate, #06-10 Innovation Place, Singapore 729931, invoices permit-exempt furniture assembly and repair. V On Construction Pte. Ltd. (ACRA UEN 201611708H), on the HDB Directory of Renovation Contractors, invoices an HDB renovation permit when the work is a new layout, hacking, or a built-in strip-out. Homey Furnishing is not a removal company and does not publish a truck rate.

Curtains, blinds and roller shades are not part of this booking. Fabric window treatments are a different product, and these pages do not quote them.

Look at the piece in the room. Do not drag a tall wardrobe across a wet floor to test it.

1. Say netting or a new bracket.
2. Do not ask for facade screws.
3. Send the MCST or Town Council answer if you have it.
4. Keep the electrical circuit on the DB page.
5. Expect a quote for any new steel.

The building changes the permission and the disposal path. It does not invent a second price.

A bracket sold by length on a shopping site is a product. Fitting it is not automatically this fabrication quote, and it is not the netting row. If the feet do not match the compressor, we will not pack it with timber and call it done.

Chemical washing and gas top-up are the servicing pages. They are not a bracket.

How you're charged

A furniture job that already has a sentence on HomeySG uses that sentence. Nothing in this table is a fuel surcharge, and the handyman hour is not added on top of a band unless the written scope says so. IKEA publishes its own checkout fee. That percentage is not a HomeySG band.

Who is allowed to do the work

The permit guide on this site already splits hardware from a renovation. A cabinet hinge, a gas strut and a drawer runner do not need an HDB renovation permit when the layout stays. A new kitchen or bathroom layout, hacking, or removing a wall does. Fines for unauthorised work are already written there as up to S$5,000. Homey Furnishing does not sign the permit invoice.

• Flat-pack assembly uses the furniture assembly catalogue. Tall units are wall-anchored on that visit. A separate anti-tip price is not printed, except the child-gate and anti-tip bundle at S$180 to S$420 when that bundle is the job.
• A built-in that has to come off the wall can become a strip-out. That is V On Construction if the flat is HDB and the work needs a permit. A loose shelf inside a carcass is not a strip-out.
• Town councils collect some bulky loose items on their own rules. We are not the collector, and we do not publish their fee.
• A new cable inside a wardrobe is an electrician. Assembly does not include a new circuit.
• Do not anchor into a household shelter wall. The permit guide already keeps TV brackets and shelves off that wall.
• A hollow partition or a false ceiling is a poor anchor for a tall wardrobe. If the fixing cannot reach structure, the visit stops.
• Active termites are not painted over. Skirting and door-frame replacement after damage uses the termite page bands. We do not claim to be the pest-control operator.
• Curtains, blinds and roller shades are not quoted here.

Ways to keep the bill smaller

• Photograph every piece before a carpenter is booked. A hinge visit is not a new kitchen.
• Put the flat-pack in the room where it will stand. Carrying a built wardrobe down an HDB corridor is a second job.
• If the drawer only sticks, use the published slide row. A new carcass is the cabinet page, and only when the board is swollen.
• Book the town council bulky slot before you pay anyone to truck a loose sofa. Many councils collect a limited number of loose items. Built-ins are usually excluded.
• Photograph the ledge and the compressor feet. A catalogue bracket is not a measurement.

WhatsApp the photos to +65 8561 0630.

Netting is the published ledge row. A new bracket is quote on inspection.

Anything not in that table is quote on inspection.

WhatsApp the photos to +65 8561 0630. The reply uses a band already printed on HomeySG, or it says quote on inspection.

• Ledge netting
• Aircon placement
• Metal fabrication
• Sheet metal
• Ledge rules
• Handyman price list