Shopfront roller shutters, motors and folding security grilles
Commercial roller shutter repair in Singapore is S$250 to S$1,350. Track realignment and a limit reset are S$250 to S$480. A key-switch, receiver or chain-block drive is S$280 to S$550. A torsion spring, curtain slat or 300kg to 800kg motor overhaul is S$580 to S$1,350. A folding security grille is S$260 to S$520.
trusted by 500+
A skew track, a dead control, or a tired spring
This page is the metal shopfront shutter and the folding grille. It is not an indoor fabric roller blind, and HomeySG does not sell new indoor fabric curtains.
| What you see | Likely cause | What to do first / typical cost |
|---|---|---|
| Shutter stops halfway or rubs one side | Guide channel is dry or the limits are wrong | Realignment: S$250 to S$480 |
| Remote or key-switch does nothing | Receiver, control box or the chain drive | S$280 to S$550 |
| Curtain is heavy or a slat is bent | Spring, slat or the tubular motor | S$580 to S$1,350 |
| Mall grille will not stack | Roller or lock cylinder | S$260 to S$520 |
2026 roller shutter and grille bands
Mall units add the overnight permit to work on the mall handyman page. Glass entrance doors are the floor spring page.
| Job | 2026 SGD band | Inclusions |
|---|---|---|
| Jammed roller shutter track realignment, guide de-grease and limit reset | S$250 to S$480 | Manual or motorised shutter. Side guide-channel de-greasing and limit-switch reset. This is a metal shopfront shutter, not an indoor fabric blind. |
| Roller shutter key-switch, control box, remote receiver or chain-block drive | S$280 to S$550 | Key-switch, push-button control box, remote receiver PCB or manual chain-block drive repair. |
| Torsion spring, curtain slat or tubular motor overhaul, 300kg to 800kg | S$580 to S$1,350 | Spring re-tensioning, damaged curtain slat replacement, or a tubular or side motor overhaul. |
| Folding aluminium or polycarbonate accordion security grille | S$260 to S$520 | Retail mall or shophouse grille roller and lock-cylinder repair. |
Shopfront roller shutters, motors and folding security grilles: access and preparation
Shopfront roller shutters, motors and folding security grilles is about the opening, the gate, the window or the grab point that is already there. A grille, a gate adjustment, a grab bar on sound tile, or a window that needs a seal is not automatically an HDB hacking permit. Replacing a window sash is a BCA window-safety question and an approved window contractor, not a silicone visit.
Height, the number of openings, and whether the frame is rotten change the visit. Condo facades are often MCST-controlled. HDB window replacement follows BCA as well as HDB. Landed upper floors need a safe method before a ladder goes up.
- Photos from inside the room
- Count the openings
- Say if a child or pet is the reason
- Do not remove a restrictor before the visit
- Note HDB, condo or landed
Plan Shopfront roller shutters, motors and folding security grilles
Look from inside. Do not work over a railing.
Identify the hardware: roller, closer, rivet, mesh or bar.
Repair or fit the part the opening can take. Do not drill a shelter wall.
Test the latch, the closer or the mesh tension.
- Jammed roller shutter track realignment, guide de-grease and limit resetS$250 to S$480
- Roller shutter key-switch, control box, remote receiver or chain-block driveS$280 to S$550
- Torsion spring, curtain slat or tubular motor overhaul, 300kg to 800kgS$580 to S$1,350
- Folding aluminium or polycarbonate accordion security grilleS$260 to S$520
| Access | HDB | Condo | Landed |
|---|---|---|---|
| Windows | BCA retrofitting applies to casements. A seal is not a new sash. | MCST may require the original facade look. | Upper storeys need tied access. Do not free-climb. |
| Bars and mesh | Grab bars need sound tile or a stud, not a hollow door. | The same fixing rule, plus a management notice if drilling is noisy. | External gates and balustrades are checked for rust, not painted over. |
| Shelter | Do not screw into an HDB household shelter wall or cover the vent. | A condo safe room, if any, follows the by-law. | A landed shelter or store is not a place for an improvised rack across a vent. |
- Photos from inside the room
- Count the openings
- Say if a child or pet is the reason
- Do not remove a restrictor before the visit
- Note HDB, condo or landed
Frequently Asked Questions
How much does roller shutter repair cost in Singapore?
Track realignment and a limit reset are S$250 to S$480. A spring, slat or 300kg to 800kg motor overhaul is S$580 to S$1,350.
Can you repair a mall folding security grille?
Yes. Rollers and the lock cylinder on an aluminium or polycarbonate accordion grille are S$260 to S$520, plus the mall permit-to-work if the slot is after hours.
Is this the same as a fabric roller blind?
No. This is a commercial metal shutter or folding grille. HomeySG does not sell new indoor fabric curtains, and indoor blind mechanisms are a different page.