Steel frames, gates and shelves, quoted from the drawing

Metal fabrication Singapore searches mix a new mild-steel gate, a shelf bracket, and a snapped hinge. They are not one invoice. The autogate and gate welding page prices the repair: on-site arc or MIG welding and primer at S$180 to S$350 when the leaf can be propped, a board or limit or battery at S$220 to S$450, an arm or underground motor at S$480 to S$950, and a sliding track and latch at S$240 to S$480. Those rows stay there. This page is a piece that does not exist yet: a frame, a gate leaf, a rack, a planter stand. That is quote on inspection. We do not publish a rate per kilogram or per foot of steel.

A new gate at an HDB service yard or a landed car porch is not “just a weld” because the old hinge once was. If the leaf, the posts and the latch are being made, send the opening, the swing, and a photo of the existing pier. If the work changes the flat’s renovation scope, HDB’s renovation page applies, including a fine of up to $5,000 when a renovation breaches the rules. Applying for approval is the permit step. V On Construction invoices that permit. Homey Furnishing invoices the exempt repair. A hinge weld on a leaf that stays is the repair the autogate page already calls metalwork, not a renovation. Do not stretch that sentence across a new leaf.

Stair metal is the other trap. Re-anchoring a loose handrail is S$250 to S$480. A wobbly glass balustrade with the glass intact is S$350 to S$780. The staircase page already says BCA Approved Document Section C looks for a barrier of at least 1.0 m and for clamps that do not deflect, and that a new barrier design or a height change is permit work. We will not design a new stair as a furniture extra. BCA’s page on works that do not need plan approval is the question to read before anyone pretends a new flight is maintenance. A squeaky tread is S$380 to S$850. It is not a new staircase.

Shelving in steel is quote on inspection unless it is a loose furniture carton, which is the assembly band, or a wall shelf whose first install has no published price. The shop display-shelving page is a mall gondola and a glass showcase, with showcase hardware at S$250 to S$550 when the photo matches. A workshop rack for a factory is not that showcase. Send the span and the load. We will not guess a steel thickness from a sketch with no dimensions. A shelf screwed into a household shelter wall is refused.

We do not publish a welding licence class, a warranty in years, or a powder-coat colour chart with prices. Outdoor steel rusts in Singapore rain. A primer on the hinge repair is part of that S$180 to S$350 sentence. A full powder coat on a new gate is part of the quote, not a line we have printed. Mains power inside an autogate controller follows the autogate page: it is not a new gate. Window grilles, invisible grilles and window repairs stay on the window pages. Curtains are not a metal product.

Homey Furnishing Pte. Ltd. (ACRA UEN 202018148K), 27 Mandai Estate, #06-10 Innovation Place, Singapore 729931, invoices permit-exempt furniture assembly and repair. V On Construction Pte. Ltd. (ACRA UEN 201611708H), on the HDB Directory of Renovation Contractors, invoices an HDB renovation permit when the work is a new layout, hacking, or a built-in strip-out. Homey Furnishing is not a removal company and does not publish a truck rate.

Curtains, blinds and roller shades are not part of this booking. Fabric window treatments are a different product, and these pages do not quote them.

Look at the piece in the room. Do not drag a tall wardrobe across a wet floor to test it.

1. Say repair of an existing leaf, or a new piece.
2. Photograph the opening and the swing.
3. Do not send a per-foot steel rate for us to honour.
4. Ask whether the barrier height changes before you call it a repair.
5. Keep window grilles on the window pages.

The building changes the permission and the disposal path. It does not invent a second price.

Mild steel, stainless and aluminium do not share a price. Stainless and aluminium have their own pages so a 304 rack is not invoiced as a mild-steel hinge weld. Acrylic display pieces are a third page. If you do not know the metal, send a photo of a cut edge or a magnet test you actually did. We will not guess the alloy from a paint colour.

A magnet sticking does not prove the hinge weld price applies. It only says the metal is magnetic. The scope is still repair or new.

How you're charged

A furniture job that already has a sentence on HomeySG uses that sentence. Nothing in this table is a fuel surcharge, and the handyman hour is not added on top of a band unless the written scope says so. IKEA publishes its own checkout fee. That percentage is not a HomeySG band.

Who is allowed to do the work

The permit guide on this site already splits hardware from a renovation. A cabinet hinge, a gas strut and a drawer runner do not need an HDB renovation permit when the layout stays. A new kitchen or bathroom layout, hacking, or removing a wall does. Fines for unauthorised work are already written there as up to S$5,000. Homey Furnishing does not sign the permit invoice.

• Flat-pack assembly uses the furniture assembly catalogue. Tall units are wall-anchored on that visit. A separate anti-tip price is not printed, except the child-gate and anti-tip bundle at S$180 to S$420 when that bundle is the job.
• A built-in that has to come off the wall can become a strip-out. That is V On Construction if the flat is HDB and the work needs a permit. A loose shelf inside a carcass is not a strip-out.
• Town councils collect some bulky loose items on their own rules. We are not the collector, and we do not publish their fee.
• A new cable inside a wardrobe is an electrician. Assembly does not include a new circuit.
• Do not anchor into a household shelter wall. The permit guide already keeps TV brackets and shelves off that wall.
• A hollow partition or a false ceiling is a poor anchor for a tall wardrobe. If the fixing cannot reach structure, the visit stops.
• Active termites are not painted over. Skirting and door-frame replacement after damage uses the termite page bands. We do not claim to be the pest-control operator.
• Curtains, blinds and roller shades are not quoted here.

Ways to keep the bill smaller

• Photograph every piece before a carpenter is booked. A hinge visit is not a new kitchen.
• Put the flat-pack in the room where it will stand. Carrying a built wardrobe down an HDB corridor is a second job.
• If the drawer only sticks, use the published slide row. A new carcass is the cabinet page, and only when the board is swollen.
• Book the town council bulky slot before you pay anyone to truck a loose sofa. Many councils collect a limited number of loose items. Built-ins are usually excluded.
• Photograph the hinge and say whether the leaf already exists. A new gate is not the S$180 weld.

WhatsApp the photos to +65 8561 0630.

Repairs that already exist stay on their pages. A new fabrication is quote on inspection.

Anything not in that table is quote on inspection.

WhatsApp the photos to +65 8561 0630. The reply uses a band already printed on HomeySG, or it says quote on inspection.

• Gate hinge welding
• Stair repairs
• Stainless steel
• Aluminium
• Approvals
• Window grilles
• Wall shelves
• Handyman price list

A new gate on this page stays quote on inspection. A spiral stair, a balcony rail, a pergola, a carport, a boundary fence and a sheet-metal part each have their own page so a hinge weld is not reused as their price.

• Spiral stairs
• Balcony railings
• Pergolas
• Carports
• Fences
• Sheet metal

A new gate stays on this page. A furniture frame, a planter and a solar mounting rail are separate quotes. None of them has a kilogram price. We do not publish a lead time.

• Furniture frames
• Metal planters
• Solar frames
• Drawings, no lead time