Standing desks, monitor arms and office workstation setup
Standing desk setup in Singapore is S$140 to S$1,800. One motorised desk with monitor arms and a cable spine is S$140 to S$260. A move, with actuator packing and recalibration, is S$180 to S$320. A wall-mounted ultrawide, PET divider, pegboard and PDU is S$150 to S$280. A 10 to 30 desk office rollout is S$580 to S$1,800.
trusted by 500+
One desk, a house move, or a whole office
The frame arrives in a flat carton and the arms arrive with the wrong clamp for the desktop thickness. The visit is the assembly, the clamp, and getting the cables off the floor.
| What you see | Likely cause | What to do first / typical cost |
|---|---|---|
| New Omnidesk, Magnus Pro, Everdesk or Uplift is still in boxes | Assembly and the monitor arms were not in the delivery | S$140 to S$260 |
| The desk has to move house or office | The actuator legs need packing, not a general mover | S$180 to S$320 |
| Cables cross the walkway | No trunking or spine | Divider, pegboard and PDU: S$150 to S$280 |
| Ten or more desks arrive in the same week | A rollout, not ten separate visits | S$580 to S$1,800 |
2026 standing desk and office bands
Flat-pack furniture that is not a desk is furniture assembly. A meeting-room screen that is not a video bar is TV mounting.
| Job | 2026 SGD band | Inclusions |
|---|---|---|
| Motorised standing desk assembly, monitor arms and cable spine | S$140 to S$260 | Omnidesk, Secretlab Magnus Pro, Everdesk, Uplift or a Taobao dual-motor frame, dual or triple gas-spring monitor arms, and under-desk cable spine routing. |
| Standing desk move: disassembly, actuator packing and reassembly | S$180 to S$320 | Safe actuator packing, desktop re-drilling if the new position needs it, and recalibration at the new address. |
| Ultrawide monitor, PET desk divider, pegboard and under-desk PDU | S$150 to S$280 | Wall-mounted ultrawide arm or a clamped arm, acoustic PET divider, pegboard and a surge PDU fixed off the floor. |
| B2B workstation setup, 10 to 30 desks | S$580 to S$1,800 | Desks, monitor arms, chamfered floor cable trunking and meeting-room video-bar mounting. After-hours mall access is extra when the building requires it. |
A carpenter study table is not this desk
The standing-desk bands stay here. An L-shaped top built to a bedroom, and a meeting table, are separate quotes.
Plan Standing desks, monitor arms and office workstation setup
Confirm access hours and the person who signs the permit-to-work.
Protect the public side of the unit. Customers and patients are not a home audience.
Do the agreed scope. Separate a repair from a cleaning retainer if both are booked.
Dispose of waste the way the building requires.
- Motorised standing desk assembly, monitor arms and cable spineS$140 to S$260
- Standing desk move: disassembly, actuator packing and reassemblyS$180 to S$320
- Ultrawide monitor, PET desk divider, pegboard and under-desk PDUS$150 to S$280
- B2B workstation setup, 10 to 30 desksS$580 to S$1,800
| Access | HDB | Condo | Landed |
|---|---|---|---|
| Mall or office | After-hours rules and a permit-to-work are common. | A condo shop follows the MCST as well as the landlord. | A landed shophouse still has a public pavement. Keep it clear. |
| Clinic or school | Work around operating hours. The operator remains the licensee. | The same, inside a commercial condo. | Name the rooms. A hall and a pantry are not one cupboard. |
| Waste | The building may ban the home chute. | Use the service lift and the building’s waste rule. | A landed bin is not a mall compactor. Ask where waste goes. |
- Unit number and access hours
- Name the trade: clean, repair, or both
- Send a photo of the item that failed
- Say if a permit-to-work is required
- Keep customers out of the work area
Frequently Asked Questions
How much does standing desk assembly cost in Singapore?
A motorised Omnidesk, Secretlab Magnus Pro, Everdesk, Uplift or Taobao dual-motor frame, with monitor arms and a cable spine, is S$140 to S$260.
Can you move a standing desk without damaging the legs?
Yes. Disassembly, actuator packing and reassembly with recalibration is S$180 to S$320. The legs are not thrown in with loose furniture.
Do you set up whole offices?
A bulk visit of 10 to 30 desks, monitor arms, floor trunking and a meeting-room video bar is S$580 to S$1,800.