JTC, Tuas, Jurong and Ubi facility handyman
Industrial handyman work in Singapore is S$380 to S$780 for an SS 332 fire-exit panic bar, door closer and lever lock. Loading-bay bumpers, bollards and roller-shutter tracks are S$450 to S$1,100. Epoxy or concrete pothole patching with safety-yellow walkway lines is S$680 to S$2,400. A JTC, Ascendas or Mapletree B1 or B2 minor reinstatement is S$1,200 to S$4,800.
trusted by 500+
The exit door, the dock, the aisle, or the lease end
These are the four visits a facility manager actually books between tenants. A full factory fit-out is a different contractor. This page is the minor works the handover checklist names.
| What you see | Likely cause | What to do first / typical cost |
|---|---|---|
| Fire exit will not open in one push | Panic bar, closer or lock has failed | SS 332 hardware: S$380 to S$780 |
| Dock bumper is torn or the shutter drags | Impact damage at the loading bay | S$450 to S$1,100 |
| Forklift pothole on the pedestrian line | Spalled concrete, faded yellow paint | Patch and line marking: S$680 to S$2,400 |
| JTC or REIT unit is being handed back | Anchors, floor, DB labels, washroom | Minor reinstatement: S$1,200 to S$4,800 |
2026 industrial bands
Areas we cover include Tuas, Jurong, Ubi and other JTC and REIT estates. The visit includes a MOM WSH risk assessment. It does not include production-line machinery.
| Job | 2026 SGD band | Inclusions |
|---|---|---|
| Fire-exit panic bar, closer and industrial lock | S$380 to S$780 | SS 332 push-bar, heavy-duty door closer and an industrial lever lock on a fire exit. |
| Dock bumper, corner guard, bollard or shutter track | S$450 to S$1,100 | Loading-bay rubber bumper, corner guard, bollard, or a manual roller-shutter guide track. |
| Epoxy or concrete patch and yellow walkway lines | S$680 to S$2,400 | Spalling and pothole mortar patching, plus MOM WSH safety-yellow pedestrian line marking. |
| JTC, Ascendas or Mapletree B1 and B2 minor reinstatement | S$1,200 to S$4,800 | Racking anchor grinding, floor patching, DB labelling, and washroom and office touch-up at handover. |
JTC, Tuas, Jurong and Ubi facility handyman: access and preparation
JTC, Tuas, Jurong and Ubi facility handyman is planned as a site with a manager, a closing time, and a permit-to-work where the building asks for one. A shop, a clinic, a preschool, a gym or a small office is not a home call-out with the same access.
Night work, a security escort, and the size of the unit change the visit. A clinic retainer follows a written hygiene schedule. HomeySG is the contractor, not the licensed clinic. An F&B hood and grease trap is a different page from a domestic kitchen degrease.
- Unit number and access hours
- Name the trade: clean, repair, or both
- Send a photo of the item that failed
- Say if a permit-to-work is required
- Keep customers out of the work area
Plan JTC, Tuas, Jurong and Ubi facility handyman
Confirm access hours and the person who signs the permit-to-work.
Protect the public side of the unit. Customers and patients are not a home audience.
Do the agreed scope. Separate a repair from a cleaning retainer if both are booked.
Dispose of waste the way the building requires.
- Fire-exit panic bar, closer and industrial lockS$380 to S$780
- Dock bumper, corner guard, bollard or shutter trackS$450 to S$1,100
- Epoxy or concrete patch and yellow walkway linesS$680 to S$2,400
- JTC, Ascendas or Mapletree B1 and B2 minor reinstatementS$1,200 to S$4,800
| Access | HDB | Condo | Landed |
|---|---|---|---|
| Mall or office | After-hours rules and a permit-to-work are common. | A condo shop follows the MCST as well as the landlord. | A landed shophouse still has a public pavement. Keep it clear. |
| Clinic or school | Work around operating hours. The operator remains the licensee. | The same, inside a commercial condo. | Name the rooms. A hall and a pantry are not one cupboard. |
| Waste | The building may ban the home chute. | Use the service lift and the building’s waste rule. | A landed bin is not a mall compactor. Ask where waste goes. |
- Unit number and access hours
- Name the trade: clean, repair, or both
- Send a photo of the item that failed
- Say if a permit-to-work is required
- Keep customers out of the work area
Frequently Asked Questions
How much is a fire-exit panic bar replacement?
An SS 332 push-bar, a heavy-duty closer and an industrial lever lock are S$380 to S$780. The door stays a fire exit.
Do you do JTC unit reinstatement?
Minor B1 and B2 reinstatement for JTC, Ascendas and Mapletree units is S$1,200 to S$4,800: anchor grinding, floor patching, DB labelling, and washroom and office touch-up.
Can you build a steel mezzanine or supply pallet racking?
A mezzanine is quote on inspection on the mezzanine page. We do not sell branded pallet racking. Grinding old racking anchors at handover can be this reinstatement. We are not a professional engineer.