Cooker hoods, gas hobs and induction hobs, including the cutout
Cooker hood and hob replacement in Singapore runs from S$120 for a stainless adapter trim to S$580 for a hood-and-hob combo with soffit trim. A slimline or chimney hood is S$140 to S$260. A gas or plug-in induction drop-in is S$150 to S$280. Enlarging a stone cutout is priced on the calculator at S$250 to S$450.
trusted by 500+
The hood, the hob, or the hole in the stone
Brand crews connect the appliance they sold. They do not cut quartz, close a gap with a trim, or lower a spice rack that now fouls the hood.
| What you see | Likely cause | What to do first / typical cost |
|---|---|---|
| New hood will not meet the old duct | The spigot or the charcoal filter has changed | Hood swap: S$140 to S$260 |
| New hob is smaller than the cutout | The old gas hob was wider | Adapter trim: S$120 to S$240 |
| New hob is larger than the cutout | The stone was cut for the previous model | Wet cutout enlargement is on the calculator: S$250 to S$450 |
| Switching piped gas to induction | The gas must be capped and the hob needs a 20A or 32A point | Combo visit S$280 to S$580, plus LGSW and the isolator if they are not already in the board |
2026 hood and hob bands
Itemise the cutout, the soffit and the gas or electrical compliance in the hood and hob cutout checker. The changeover steps are in the gas-to-induction guide.
| Job | 2026 SGD band | Inclusions |
|---|---|---|
| Slimline or chimney cooker hood replacement | S$140 to S$260 | Fujioh, Mayer, Rinnai, EF, Bosch, Brandt or Tecno hood, charcoal filter and flexible aluminium duct reconnection. The hood is supplied by you unless agreed in the visit. |
| Built-in gas hob or plug-in induction hob drop-in replacement | S$150 to S$280 | LPG cylinder regulator and hose, or a plug-in induction or ceramic hob, plus a high-temperature silicone perimeter seal. |
| Stainless or black anodised hob gap-filler adapter trim | S$120 to S$240 | Fabrication and fitment when the new hob is smaller than the old countertop cutout. |
| Cooker hood and hob combo, soffit trim and 20A isolator check | S$280 to S$580 | Both appliances, upper-cabinet soffit or spice-rack height modification, and a dedicated 20A isolator check. A new DB way is priced on the electrical page. |
Clean a hood, or replace it
Plan Cooker hoods, gas hobs and induction hobs, including the cutout
List the tasks and put the one that blocks the home first.
Protect the floor and confirm the part, if you bought it, actually fits.
Do that task. Do not start a second trade that needs another licence.
Test it. A hinge that still sags is not finished.
- Slimline or chimney cooker hood replacementS$140 to S$260
- Built-in gas hob or plug-in induction hob drop-in replacementS$150 to S$280
- Stainless or black anodised hob gap-filler adapter trimS$120 to S$240
- Cooker hood and hob combo, soffit trim and 20A isolator checkS$280 to S$580
| Access | HDB | Condo | Landed |
|---|---|---|---|
| HDB | Exempt repairs do not need a permit. Hacking does. | Use the condo column if it is not HDB. | Use the landed column if it is not HDB. |
| Condo | Book the lift and the hours before the van arrives. | MCST by-laws sit on top of the task list. | A landed house has no MCST lift. |
| Landed | Name the storey. A roof or a gate is not a flat task. | A condo is not landed. | External work waits for safe weather and a safe ladder. |
- One photo per task
- Say which task is urgent
- Have parts on site if you bought them
- Clear a path
- Say HDB, condo or landed
Frequently Asked Questions
How much does a cooker hood replacement cost in Singapore?
Labour to swap a Fujioh, Mayer, Rinnai, EF, Bosch, Brandt or Tecno hood, including the charcoal filter and flexible duct, is S$140 to S$260. The appliance is supplied by you unless the visit includes it.
Can you fit an induction hob in a gas hob cutout?
If the new hob is smaller, a stainless adapter trim is S$120 to S$240. If it is larger, the stone is enlarged with wet cutting. Piped gas is capped by a Licensed Gas Service Worker before the hob is energised.
Does an induction hob need a new power point?
A 13A plug-in hybrid can use an existing socket if the circuit can take it. A 20A or 32A hob needs a double-pole isolator. That check is inside the S$280 to S$580 combo. A new DB way is priced separately.