A boundary fence or mesh enclosure, not a hinge weld

A new boundary fence, mesh run or enclosure is quote on inspection. Homey Furnishing is not a professional engineer. URA’s landed page says planning permission is not required for gates, walls, fences or other enclosures if they are not higher than 1.8 m. We do not certify the height. A hinge weld on an existing leaf is S$180 to S$350.

4.9

trusted by 500+

A wall-mounted shelf

Photo: AndeyWiki, CC BY-SA 4.0, via Wikimedia Commons.

HDB licensed renovation contractor badge
Warranty satisfaction badge
Singapore service badge

How it works

  1. 1

    Send one photo of each piece, the block, and whether the home is HDB, condo or landed.

  2. 2

    We match a band already printed on HomeySG, or we say quote on inspection.

  3. 3

    A layout change, hacking, or a built-in strip-out is named as V On Construction. A truck is not included.

  4. 4

    You confirm the scope before anyone comes. Curtains, blinds and roller shades stay off the booking.

What this job actually is

1. Existing leaf or new run 2. Hinge weld if it matches 3. New fence is a quote 4. 1.8 m is URA’s sentence
Weld a hinge, or fabricate a fence

Fence searches mix a landed boundary, an HDB service-yard gate, and a balcony mesh for a cat. A new run of posts and infill is quote on inspection. We do not publish a price per metre of fence. The metal fabrication page is the general steel quote. This page is the boundary. An HDB main gate leaf that already has a page at the HDB gate URL stays that page for the leaf, and a dropped hinge stays the autogate weld at S$180 to S$350 when the leaf can be propped.

URA’s landed-house page says planning permission is not required for construction of gates, walls, fences or other enclosures if the structures are not higher than 1.8 m. That is URA’s sentence. We will not measure your fence and issue a planning certificate, and we will not build higher and call it 1.8 m. If the wall is taller, or it is a boundary that also holds back earth, stop and read the page with a Qualified Person. Homey Furnishing Pte. Ltd. is not a professional engineer, not an architect, and not a Qualified Person. BCA’s page on works that do not need plan approval says a Qualified Person is an architect registered with the Board of Architects, or a professional engineer registered with the Professional Engineers Board, holding a valid practising certificate. We do not sign a structural plan and we do not decide that a work is exempt. If the drawing changes a stair, a floor, a roof or a barrier, the owner asks that Qualified Person. We quote the metal after the permission is clear, or we stop.

Cat mesh and pigeon mesh are smaller products with their own rows. A main-gate pet mesh is S$140 to S$260 and a balcony or yard gap is S$250 to S$680 on the pet-proofing page. Ledge netting is S$350 to S$580 and a full-height yard enclosure with 316 mesh is S$580 to S$980 on the bird-proofing page. Use those rows when the photo is mesh on an existing opening. A new steel boundary with posts in the ground is this quote, not the pet-mesh row.

The neighbour’s side of the line is not ours to dig. Send proof of where the boundary is if you have it. We do not survey. A condo perimeter is the MCST, and BCA’s exemptions page says strata works might need that approval. An HDB corridor gate that swings into the common passage is HDB’s renovation rules, including a fine of up to $5,000 when a renovation breaches them. Applying for approval is the permit path. V On Construction invoices that permit. A shelter is not a fence post. Clause 7.2 refuses shelter-wall fixings.

Sliding gates along a fence use the autogate track row, S$240 to S$480, only when an existing sliding leaf needs a track and latch. A new sliding leaf is a quote. A motor is S$480 to S$950. Powder coat is inside the fence quote, not a published colour list. We do not publish a galvanising price per tonne. Hot-dip plants sell that process. If you want the fence galvanised, say so and the quote will name it or say we cannot. Curtains are not a fence infill.

Homey Furnishing Pte. Ltd. (ACRA UEN 202018148K), 27 Mandai Estate, #06-10 Innovation Place, Singapore 729931, invoices permit-exempt furniture assembly and repair. V On Construction Pte. Ltd. (ACRA UEN 201611708H), on the HDB Directory of Renovation Contractors, invoices an HDB renovation permit when the work is a new layout, hacking, or a built-in strip-out. Homey Furnishing is not a removal company and does not publish a truck rate.

Curtains, blinds and roller shades are not part of this booking. Fabric window treatments are a different product, and these pages do not quote them.

What to do first

Look at the piece in the room. Do not drag a tall wardrobe across a wet floor to test it.

  1. Photograph the whole line and the neighbour’s side.
  2. Say new posts, or a repair of a leaf that exists.
  3. Do not ask us to certify 1.8 m.
  4. Keep pet mesh and pigeon netting on their pages.
  5. Expect a quote for a new run.
What you seeSafe checkStop
New boundary fenceFabricationquote on inspection
Hinge snapped, leaf staysOn-site weldS$180 to S$350
Pet mesh on an existing gatePet-proofing pageS$140 to S$260 for a main-gate mesh
You want a height certificateWe do not issue oneURA’s sentence is on URA’s page

HDB, condo and landed

The building changes the permission and the disposal path. It does not invent a second price.

QuestionHDBCondoLanded
HDBA corridor gate is not a landed boundary.Common-passage swing is an HDB question.Shelter walls are refused.
CondoThe perimeter is the MCST.We do not publish their deposit.A private balcony mesh may be the pet page.
LandedURA’s 1.8 m sentence is the enclosure note.We do not certify it.A new run is a quote.

Mesh, picket, or solid sheet

The infill does not create a rate. Mesh, vertical bars and a solid sheet are all quote on inspection when the posts are new. A solid sheet that acts as a wall is more likely to be the planning question. We will not hide a wall inside the word fence.

Gates in the fence are part of the same quote if they are new leaves. Hardware that already has a row, such as a sliding track at S$240 to S$480, is used only when that repair matches. Say which leaves are new.

How you're charged

How you're charged

A furniture job that already has a sentence on HomeySG uses that sentence. Nothing in this table is a fuel surcharge, and the handyman hour is not added on top of a band unless the written scope says so. IKEA publishes its own checkout fee. That percentage is not a HomeySG band.

ChargeWhat it covers2026
Published furniture bandThe photo matches a row already on a furniture pageThat row
Bed frame assemblyThe bed row on the furniture assembly pageS$80 to S$150
Wardrobe assemblyThe wardrobe row, confirmed from photosS$100 to S$650
Cabinet door alignmentThe hinge-adjustment visit on cabinet repairS$50 to S$100
Soft-close slides, 1 to 3 drawersThe drawer-runner pageS$110 to S$220
Dining chair seats, 4 to 6Seat re-upholstery, not a new sofaS$240 to S$480
Custom carpentry, a truck, a full sofa re-cover, or rattan bindingNo catalogue row for that productquote on inspection

Who may do the work

Who is allowed to do the work

The permit guide on this site already splits hardware from a renovation. A cabinet hinge, a gas strut and a drawer runner do not need an HDB renovation permit when the layout stays. A new kitchen or bathroom layout, hacking, or removing a wall does. Fines for unauthorised work are already written there as up to S$5,000. Homey Furnishing does not sign the permit invoice.

  • Flat-pack assembly uses the furniture assembly catalogue. Tall units are wall-anchored on that visit. A separate anti-tip price is not printed, except the child-gate and anti-tip bundle at S$180 to S$420 when that bundle is the job.
  • A built-in that has to come off the wall can become a strip-out. That is V On Construction if the flat is HDB and the work needs a permit. A loose shelf inside a carcass is not a strip-out.
  • Town councils collect some bulky loose items on their own rules. We are not the collector, and we do not publish their fee.
  • A new cable inside a wardrobe is an electrician. Assembly does not include a new circuit.
  • Do not anchor into a household shelter wall. The permit guide already keeps TV brackets and shelves off that wall.
  • A hollow partition or a false ceiling is a poor anchor for a tall wardrobe. If the fixing cannot reach structure, the visit stops.
  • Active termites are not painted over. Skirting and door-frame replacement after damage uses the termite page bands. We do not claim to be the pest-control operator.
  • Curtains, blinds and roller shades are not quoted here.

Ways to keep the bill smaller

Ways to keep the bill smaller

  • Photograph every piece before a carpenter is booked. A hinge visit is not a new kitchen.
  • Put the flat-pack in the room where it will stand. Carrying a built wardrobe down an HDB corridor is a second job.
  • If the drawer only sticks, use the published slide row. A new carcass is the cabinet page, and only when the board is swollen.
  • Book the town council bulky slot before you pay anyone to truck a loose sofa. Many councils collect a limited number of loose items. Built-ins are usually excluded.
  • Photograph the whole boundary, not one rusty post. Say who owns the line.

WhatsApp the photos to +65 8561 0630.

Price, or quote on inspection

A new fence has no per-metre rate. Welds and mesh rows are other products.

Anything not in that table is quote on inspection.

Scope already published2026 band in the repoWhere it lives
New boundary fencequote on inspectionNo price per metre
Hinge weld, existing leafS$180 to S$350Autogate page
Main-gate pet meshS$140 to S$260Pet-proofing page
Sliding track and latchS$240 to S$480Existing sliding leaf

WhatsApp the photos to +65 8561 0630. The reply uses a band already printed on HomeySG, or it says quote on inspection.

A wall-mounted shelf
A shelf is not a fence. A new run is a quotePhoto: AndeyWiki, CC BY-SA 4.0, via Wikimedia Commons.

Related pages

Frequently Asked Questions

How much is a boundary fence in Singapore?

Quote on inspection. We do not publish a price per metre. A hinge weld on a leaf that already exists is S$180 to S$350.

Is 1.8 m always allowed?

URA says planning permission is not required for gates, walls, fences or other enclosures if they are not higher than 1.8 m. We do not certify the height.

Are you a professional engineer?

No. We are not a Qualified Person. A retaining wall is not a fence we will rename.

Is cat mesh this page?

No. A main-gate pet mesh is S$140 to S$260 on the pet-proofing page. A new steel boundary is a quote.

Can you galvanise it?

Only if the quote says so. We do not publish a price per tonne. A hinge-weld primer is not a galvanised fence.

Tell us what you need help with

This opens WhatsApp with your details filled in. You can attach photos there for a faster quote. See our privacy policy.

Prefer to call? +65 8561 0630