PAX wardrobe assembly, including doors and a real anchor

PAX is the wardrobe people mean when they search IKEA assembly and then add the product name. Frames, shelves, a hanging rail, hinge doors or sliding doors, and sometimes a stack of drawers. IKEA own service page says a booking can cover anything from a single piece to an entire PAX system, and that integrated lights are tied to their in-store PAX assembly. That is their scope. Our scope is the wardrobe sentence already printed: S$100 to S$650, and S$250 to S$650 for a larger multi-door wardrobe when the photos confirm it. If your combination is wider than that sentence can honestly cover, the line is quote on inspection. We will not invent a per-door PAX adder.

Drawers inside a PAX are not automatically the kitchen runner repair. If they are part of the new assembly and the runners are in the carton, they are part of describing the wardrobe. If an existing PAX drawer has failed later, the drawer page applies: full-extension soft-close slides for one to three drawers are S$110 to S$220, and a Blum Tandembox, Antaro, Legrabox or Hafele damper and carriage is S$160 to S$320 when the stamp matches. A collapsed drawer bottom is S$140 to S$280. Do not pay a new wardrobe price to replace one carriage.

Sliding doors are the other mix-up. A PAX sliding door that came in the carton is assembly. A floor-to-ceiling mirror door on a Hafele, OPK or carpenter track in a built-in wardrobe is the wardrobe sliding-door page: rollers S$160 to S$280, a bent track of 1.5m to 3.0m at S$240 to S$420, re-hanging a 35kg to 60kg mirror door at S$280 to S$550, and a 2-door or 3-door overhaul at S$380 to S$680. That page also says a new built-in wardrobe of that size is often about S$3,000. That is a sentence already on HomeySG. It is not a measurement of your bedroom, and it is not a foot-run rate copied from a competitor. Custom carpentry stays quote on inspection on the carpentry guide.

Hinges on PAX doors use the same honesty. A generic hinge is from S$38 a door on the cabinet page. Alignment of doors that sag is S$50 to S$100 a visit. A Blum Clip Top 110 degree pair is S$90 to S$180 and a 155 degree pair is S$120 to S$220 on the hinge guide, because the stamp on the cup matters. If the PAX is new and the hinges are in the box, they are assembly hardware, not a second hinge invoice. If a door sags a year later, use the hinge page.

Safety and the building come before the pretty interior. A PAX that is taller than it is deep will tip. Anchoring is part of the assembly visit when the wall can take it. The household shelter is not that wall. A false ceiling is not that wall. HDB drilling noise stays on weekday daytime hours. In a condo, ask the MCST before anyone drills a beam the by-law cares about. West-facing bedrooms and service yards are where particle board cups if the back panel was stored damp. We will not skin a damp back panel with a new foil and call the wardrobe done. Termite-soft skirting behind the plinth is the termite page, not a PAX problem to hide.

Homey Furnishing Pte. Ltd. (ACRA UEN 202018148K), 27 Mandai Estate, #06-10 Innovation Place, Singapore 729931, invoices permit-exempt furniture assembly and repair. V On Construction Pte. Ltd. (ACRA UEN 201611708H), on the HDB Directory of Renovation Contractors, invoices an HDB renovation permit when the work is a new layout, hacking, or a built-in strip-out. Homey Furnishing is not a removal company and does not publish a truck rate.

Curtains, blinds and roller shades are not part of this booking. Fabric window treatments are a different product, and these pages do not quote them.

Look at the piece in the room. Do not drag a tall wardrobe across a wet floor to test it.

1. Photograph the frame count and the door type.
2. Say if this is a new PAX or an old built-in with a bad roller.
3. Clear the bedroom wall, including anything fixed to the shelter.
4. Do not build it in the living room.
5. Expect S$100 to S$650 only when the wardrobe sentence fits.

The building changes the permission and the disposal path. It does not invent a second price.

How you're charged

A furniture job that already has a sentence on HomeySG uses that sentence. Nothing in this table is a fuel surcharge, and the handyman hour is not added on top of a band unless the written scope says so. IKEA publishes its own checkout fee. That percentage is not a HomeySG band.

Who is allowed to do the work

The permit guide on this site already splits hardware from a renovation. A cabinet hinge, a gas strut and a drawer runner do not need an HDB renovation permit when the layout stays. A new kitchen or bathroom layout, hacking, or removing a wall does. Fines for unauthorised work are already written there as up to S$5,000. Homey Furnishing does not sign the permit invoice.

• Flat-pack assembly uses the furniture assembly catalogue. Tall units are wall-anchored on that visit. A separate anti-tip price is not printed, except the child-gate and anti-tip bundle at S$180 to S$420 when that bundle is the job.
• A built-in that has to come off the wall can become a strip-out. That is V On Construction if the flat is HDB and the work needs a permit. A loose shelf inside a carcass is not a strip-out.
• Town councils collect some bulky loose items on their own rules. We are not the collector, and we do not publish their fee.
• A new cable inside a wardrobe is an electrician. Assembly does not include a new circuit.
• Do not anchor into a household shelter wall. The permit guide already keeps TV brackets and shelves off that wall.
• A hollow partition or a false ceiling is a poor anchor for a tall wardrobe. If the fixing cannot reach structure, the visit stops.
• Active termites are not painted over. Skirting and door-frame replacement after damage uses the termite page bands. We do not claim to be the pest-control operator.
• Curtains, blinds and roller shades are not quoted here.

Ways to keep the bill smaller

• Photograph every piece before a carpenter is booked. A hinge visit is not a new kitchen.
• Put the flat-pack in the room where it will stand. Carrying a built wardrobe down an HDB corridor is a second job.
• If the drawer only sticks, use the published slide row. A new carcass is the cabinet page, and only when the board is swollen.
• Book the town council bulky slot before you pay anyone to truck a loose sofa. Many councils collect a limited number of loose items. Built-ins are usually excluded.
• Assemble it in the bedroom. A finished PAX does not turn a corner in a 3-room corridor.

WhatsApp the photos to +65 8561 0630.

The wardrobe band is the PAX band when the photo is a wardrobe. Repair rows are for later failures and for built-ins.

Anything not in that table is quote on inspection.

WhatsApp the photos to +65 8561 0630. The reply uses a band already printed on HomeySG, or it says quote on inspection.

• IKEA assembly
• Assembly catalogue
• Built-in sliding doors
• Built-in wardrobes
• HDB carpentry costs
• Hinges, if a door sags later
• Handyman price list